BUZZRACK BUZZYBEE 4H PLATFORM HITCH RACK

The Buzzybee H4 is one of Buzzrack’s latest platform hitch-mounted carrier and is built to carry four bikes. The Buzzybee H4 is lightweight at just 17.1kg for a 4 bike carrier and offers reliable bike transport for up to bikes up to 15kg each. The wheel holders fit most wheelbases, even very small bikes, while the ratchet straps allow the wheels to be easily and securely attached. The locking clamps fit most bikes, big and small, and are made from reinforced nylon so that they are highly resistant. An integrated pad prevents any scratches and each clamp is equipped with a locking knob. Buzzrack have taken care of the minor details as well, with outdoor powder coating to protect the rack from corrosion and make sure that the rack will last for years to come. Whatever hitch receiver size your car is equipped with, 1.25” or 2”, the Buzzybee H4 will fit. The Buzzrack Buzzybee H4 is a sturdy and lightweight device that can transport four bikes. With secure locking and handy folding features, this platform bike carrier is a reliable and secure way to transport your bikes.

Highlights

-The wheel holders will accommodate most wheelbases, even small children’s bikes. You can reverse the wheel supports for the really small bikes. See technical data below

-The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen

-The BUZZYBEE 4 is entirely suitable for carbon frame bikes; the rubber bike frame pads and high resistance straps hold any type of tube firmly but gently.

-The maximum permitted load is 60kg, with no bike weighing more than 20kg

-The down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car

-The patented conical fitting fits to all tow balls, even to the bolt-on tow balls we see occasionally that do not meet standards for neck length or ball diameter.

-A reminder that it locks to the tow ball.

-The BUZZYBEE 4 sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.

-Dimensions: 88cm wide x 91cm deep (measured from the centre of the tow ball to the outside edge of the number plate holder).

-The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided.

-All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!

-Not suitable for trailers, campers, or RVs

Max number of bikes4
Max weight per bike20kg
Max load capacity60kg
Max tire size3.25"
Max bike frame down tube sizediameter 75mm(3″)
Fits all ISO 50mm tow ballYes
Dimensions (width x depth x height)88 x 96 x 74 cm (Height 28cm when Folded)
Weight:15.5kg
TiltingNo
Integrated lighting board yes
Lighting board plug type7 pin (7 pin flat plug for AUS/NZ)
Bike carrier to tow ball lockyes
Bike carrier to bike lockNo

 


 

Unfortunately due to the weight and size of the bike racks they are only available for store pick up. If you're really in a pickle and need it shipped please don't hesitate to call the store on 03 9557 6461.